Installation Method for Magnetic Screen Doors
Clean accessories
a. 4 triangles: used to secure the outer frame and PVC connections
b. 2 clips: Secure the screen window and allow it to be pulled open to a desired height.
c. 1 piece of mesh screen: polyester polyester yarn mesh
d.4 Group Strips: Each group strip includes the corresponding long and short strips (back-adhesive magnetic strip, card-slot magnetic strip, PVC plastic strip).
Measurement for framing
First, determine the dimensions of the window frame and trim off any excess PVC. Once the dimensions are confirmed, insert the PVC strips into the triangular spaces to form the frame.
Pressing yarn
Lay the mesh screen flat onto the completed frame, and use the slotted magnetic strip to press the mesh screen into the PVC strip. It is recommended to insert the mesh screen diagonally into the inner side of the PVC strip using the slotted magnetic strip, then press it from the outer side as well.
Trim off the excess mesh fabric.
Trim the excess mesh fabric outside the frame along the outline.
Attach the adhesive-backed magnetic strip to the card slot’s magnetic strip using the mounting clip. Install the second clip approximately 30% from the top of the frame, then peel off the protective film from the adhesive-backed magnetic strip at the clip installation location and insert the clip.
Install screen doors
You must wipe the window frame clean and keep it dry. First, peel off the protective film from the adhesive magnet on the top edge. After securing it in place, gradually remove the protective films from the left, right, and bottom edges, as well as from the clips. Press firmly to ensure the adhesive magnetic strips are securely attached.
Attach a thin rope
Attach thin cords to the triangles on both sides below, so that the screen window can be opened and closed.
Keywords
Magnetic window screen
Contact Information
Category to which it belongs